NEWS

Chapoo releases 15/01/2014

Chapoo releases 15/01/2014
 
Published:
Chapoo releases 15/01/2014

Delcam’s FeatureCAM combines speed and safety at Hogan’s Racing

Delcam’s FeatureCAM combines speed and safety at Hogan’s Racing
 
Published:
Achieving the right balance between speed and safety is essential for everyone associated with motor racing, and not just on the track.  Hogan’s Racing Manifolds is able to achieve an outstanding level of speed and reliability when machining its parts thanks to Delcam’s FeatureCAM feature-based C...

New Product that Helps Electrical and Electronics Engineers

New Product that Helps Electrical and Electronics Engineers
 
Published:
As much as we would like to think that finite element analysis (FEA) is the be-all and end-all of simulations, it’s not true

Delcam adds more milling options for FeatureCAM

Delcam adds more milling options for FeatureCAM
 
Published:
Delcam has added a new series of options for three-axis milling and enhancements in five-axis machining to its FeatureCAM feature-based CAM software.

Achieve accurate and realistic simulation results with Moldex3D FEA Interface!

Achieve accurate and realistic simulation results with Moldex3D FEA Interface!
 
Published:
Conventionally, users perform structural analysis with an assumption of uniform material properties. However, in order to obtain a more accurate and realistic simulation results, addressing the process induced material anisotropic is important as the part is fabricated with injection molding.

Delcam to launch new milling options in FeatureCAM at IMTS

Delcam to launch new milling options in FeatureCAM at IMTS
 
Published:
Delcam will launch the 2013 release of its FeatureCAM feature-based CAM software on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 15th September.

Delcam's Vortex headed for MFG4

Delcam's Vortex headed for MFG4
 
Published:
Delcam will preview its new Vortex strategy for high-speed area clearance on booth 1736 at MFG4, the manufacturing for the future event to be held at the Connecticut Convention Center in Hartford CT from 8th to 10th May

Vondle releases Release 09/03/2012

Vondle releases Release 09/03/2012
 
Published:
Vondle releases Release 09/03/2012

Delcam launches new web site for FeatureCAM feature-based CAM system

Delcam launches new web site for FeatureCAM feature-based CAM system
 
Published:
Delcam has launched a new web site for its FeatureCAM feature-based CAM system –

Delcam for SolidWorks 2012 on show at SolidWorks World

Delcam for SolidWorks 2012 on show at SolidWorks World
 
Published:
Delcam will demonstrate the 2012 version of Delcam for SolidWorks, its integrated CAM system for SolidWorks, at SolidWorks World in San Diego from 12th to 15th February.

Delcam expands North American support team

Delcam expands North American support team
 
Published:
In order to better serve its growing customer base, Delcam is pleased to announce the continuing expansion of the North American support team with two new hires, Craig Burney, based in Windsor Ontario, Canada, and Jason Owen, based in Salt Lake City, Utah.

Delcam to show feature-based mill-turn programming at Euromold

Delcam to show feature-based mill-turn programming at Euromold
 
Published:
Delcam will demonstrate its latest developments in feature-based programming of mill-turn equipment with FeatureCAM 2012 at the Euromold exhibition to be held in Frankfurt from 29th November to 2nd December.

Delcam to launch FeatureCAM 2012 feature-based machining at EMO

Delcam to launch FeatureCAM 2012 feature-based machining at EMO
 
Published:
Delcam will launch the 2012 version of its FeatureCAM feature-based CAM system at the EMO World of Metalworking exhibition to be held in Hannover from 19th to 24th September.

Delcam China appoints eight dealers for Delcam for SolidWorks

Delcam China appoints eight dealers for Delcam for SolidWorks
 
Published:
Delcam China has appointed eight of China's leading SolidWorks resellers as sub-dealers in the country for Delcam's integrated CAM system for SolidWorks, Delcam for SolidWorks.

Delcam's latest CAM range on show in Vietnam

Delcam's latest CAM range on show in Vietnam
 
Published:
Delcam will demonstrate the latest developments in its range of CAM systems at the MTA Vietnam metalworking exhibition to be held in Ho Chi Minh City from 5th to 8th July.

Delcam's FeatureCAM certified for Autodesk Inventor 2012

Delcam's FeatureCAM certified for Autodesk Inventor 2012
 
Published:
Delcam is pleased to announce that its FeatureCAM range of feature-based CAM software products has been certified by the Autodesk Inventor Certified Application Program for Autodesk Inventor 2012 mechanical design and engineering software.

Delcam's new CAM range on show at AUSTECH

Delcam's new CAM range on show at AUSTECH
 
Published:
Delcam's Australian reseller, Camplex, will promote the company's complete range of CAM software and services at the AUSTECH exhibition to be held in Melbourne from 24th to 27th May.

Delcam's FeatureCAM gives H&R Precision success from the start

Delcam's FeatureCAM gives H&R Precision success from the start
 
Published:
Programming its machines with Delcam's FeatureCAM feature-based CAM system has helped H&R Precision to achieve continued expansion over its four-year life, despite opening just before the recession.

Delcam's Tom McCollough launches MCADCafe VideoNews

Delcam's Tom McCollough launches MCADCafe VideoNews
 
Published:
Delcam's VP of Software Development, Tom McCollough, appeared in the first of a new series of video interviews on MCADCafe.

Delcam launches multi-lingual CAM learning zone

Delcam launches multi-lingual CAM learning zone
 
Published:

Delcam has launched a multi-lingual learning zone for the 2011 version of its FeatureCAM feature-based CAM system.  This includes full details on the new release, including What’s New videos from expert Application Engineers and customer testimonials, plus the option to download a t...

Advanced Manufacturing Institute in Malaysia Teams with MSC.Software to Deliver Advanced Training for Aerospace Engineering Curriculum

Advanced Manufacturing Institute in Malaysia Teams with MSC.Software to Deliver Advanced Training for Aerospace Engineering Curriculum
 
Published:

MSC.Software Corporation, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced that Advanced Manufacturing Institute in Malaysia has been using MSC.Software solutions including MD Nastran and Patran as the basis for delivering advanced training...

RINA Relies on MSC.Software to Reduce Noise and Vibration Levels of Vessels

Published:

MSC.Software Corporation, a leader in multidiscipline simulation solutions that accelerate product innovation, today announced that RINA, a leading Italian certification company for the shipbuilding industry, has selected MD Nastran, MSC.Software's flagship solution for multidisciplinary a...

Delcam to show new CAM programs at Metalex in Thailand

Delcam to show new CAM programs at Metalex in Thailand
 
Published:

Delcam will show new versions of its PowerMILL, FeatureCAM and PartMaker CAM systems at the Metalex exhibition to be held in Bangkok, Thailand, from 24th to 27th November.  PowerMILL is Delcam’s software for high-speed and five-axis machining, while FeatureCAM offers fast and easy-t...

Delcam to launch fastest, safest PowerMILL CAM at Autosport

Published:

All autosport companies are acutely aware of the need to combine the highest possible speed with due regard for safety so it is particularly appropriate that Delcam will launch the 2011 version of its PowerMILL CAM system for five-axis and high-speed machining at the Autosport Engineering exhi...

Delcam’s FeatureCAM used by Skills USA competition winners

 Delcam’s FeatureCAM used by Skills USA competition winners
 
Published:

In the recent Automated Manufacturing Technology Skills USA competition, a three-person team from Tulsa Tech in Oklahoma won using Delcam’s FeatureCAM feature-based CAM software.

McMaster University Achieves SU-FREI Bearing Research Excellence with MSC.Software

Published:

MSC.Software, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced that McMaster University is gaining excellent results with Marc simulation software for the advanced nonlinear analysis of stable unbonded-fiber reinforced elastomeric isolator ...

Delcam’s FeatureCAM gives faster prototypes

Delcam’s FeatureCAM gives faster prototypes
 
Published:

Delcam’s FeatureCAM feature-based CAM system has speeded the production of prototype housings for marine electronics systems at the Navico development facility in Tulsa, Oklahoma.

Delcam to launch FeatureCAM 2011 at BIMU

Delcam to launch FeatureCAM 2011 at BIMU
 
Published:

Delcam will hold the European launch of the 2011 version of its FeatureCAM feature-based CAM system at the BIMU exhibition to be held in Milan from 5th to 9th October.

MSC.Software Donates Multidiscipline Simulation Software to Franklin W. Olin College of Engineering

Published:

MSC.Software, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced that it has donated 50 simulation software seats to Franklin W. Olin College of Engineering.

Delcam launches fastest feature-based machining with FeatureCAM 2011

Delcam launches fastest feature-based machining with FeatureCAM 2011
 
Published:

Delcam has launched the 2011 version of its FeatureCAM feature-based CAM system, which incorporates support for 64-bit computers, improved data exchange from a wider range of design software, the ability to use stock models and new strategies across the complete program, from turning to five-a...

Delcam to launch latest CAM systems at AMB

Delcam to launch latest CAM systems at AMB
 
Published:

Delcam will launch the German-language versions of the latest releases of its PowerMILL and FeatureCAM software on stand 4B51 at the AMB exhibition to be held in Stuttgart from 28th September to 2nd October.  Delcam will also demonstrate the German-language edition of its Delcam for Solid...

MSC.Software Announces MD Nastran Desktop

MSC.Software Announces MD Nastran Desktop
 
Published:

MSC.Software, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced the introduction of MD Nastran Desktop.

Delcam programs to be Designated Software for China National NC Competition

Delcam programs to be Designated Software for China National NC Competition
 
Published:

A number of Delcam programs, including PowerMILL, PowerSHAPE and FeatureCAM, have been selected as the Designated CADCAM Software for the finals of the fourth China National Numerical Control Skills Competition to be held in Guangzhou later this year.

Delcam to launch new integrated CAM for SolidWorks at IMTS

Delcam to launch new integrated CAM for SolidWorks at IMTS
 
Published:

Delcam, the world’s leading specialist supplier of machining software, will launch the 2011 version of its integrated CAM system for SolidWorks at the IMTS exhibition to be held in Chicago from 13th to 17th September.

Delcam to show high-speed programming at TCT

Delcam to show high-speed programming at TCT
 
Published:

At the TCT exhibition to be held at the Ricoh Arena, Coventry, on 20th and 21st October, Delcam will show how high-speed programming with its FeatureCAM CAM software can make machining of components faster than rapid prototyping.

MSC.Software Releases SimXpert 2010

MSC.Software Releases SimXpert 2010
 
Published:

MSC.Software, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced that SimXpert 2010 is released and ready for download.