NEWS

Sigmetrix CETOL 6 v8.3 Analyzes Tolerances in SolidWorks

Sigmetrix CETOL 6 v8.3 Analyzes Tolerances in SolidWorks
 
Published:
Sigmetrix , a recognized leader in geometric, dimensioning and tolerancing (GD&T) and tolerance analysis software and Dassault Systèmes, the 3DEXPERIENCE company, world leader in 3D design software, 3D digital mock up and product lifecycle management (PLM) solutions, today announced the launch of i...

Delcam to offer free CAM for SolidWorks at EMO

Delcam to offer free CAM for SolidWorks at EMO
 
Published:
Delcam will give out a free version of its Gold-Certified Delcam for SolidWorks integrated CAM system for SolidWorks on stand K18 in Hall 25, the largest stand of any CADCAM supplier, at the EMO exhibition to be held in Hannover, Germany, from 16th to 21st September.

Dassault Systèmes Announces the V6 Release 2013x of its 3DEXPERIENCE Platform

Dassault Systèmes Announces the V6 Release 2013x of its 3DEXPERIENCE Platform
 
Published:
New Release Brings Strong Set of Applications and Industry Solution Enhancements

Dassault Systèmes Simplifies 3D Design with SolidWorks 2013

Dassault Systèmes Simplifies 3D Design with SolidWorks 2013
 
Published:
Latest Release of Leading 3D Design Solution Enables Faster Model Creation, Optimized Performance, Enhanced Collaboration

Dell Debuts Stunning Additions to XPS Brand: Superb Performance and Design Without Compromise

Dell Debuts Stunning Additions to XPS Brand: Superb Performance and Design Without Compromise
 
Published:
Today at the Internationale Funkausstellung Berlin (IFA) conference, Dell unveiled three powerful additions to its industry-leading XPS brand of computers

New Release of InspectionXpert for AutoCAD Mechanical 2012

New Release of InspectionXpert for AutoCAD Mechanical 2012
 
Published:
InspectionXpert Corporation today announced the release of InspectionXpert for AutoCAD Mechanical 2012. InspectionXpert for AutoCAD Mechanical 2012 automates the ballooning of AutoCAD drawings and creation of Inspection Sheets for AS9102, PPAP and other quality control inspections.

Decorex 2012 in London

Decorex 2012 in London
 
Published:
LONDON, UK (3 Aug 2012) - CadLine, the CAD solution developer and supplier, delivering innovative and market-foc

Dassault Systèmes Launches “Smart, Safe & Connected Car” Industry Solution Experience

Published:
New Transportation & Mobility Solution Experience for Embedded Systems Helps Automakers Develop Smarter and Safer Vehicles

GstarCAD Reaps in Abundance at Expooficina2012

GstarCAD Reaps in Abundance at Expooficina2012
 
Published:
Nersoft systems S.A.C , the distributor of Gstarsoft in Peru has attended Expooficina2012 in Peru from May 24 to May 26, 2012 and achieved great success.

Ideal Home Show 2012 in Glasgow

Ideal Home Show 2012 in Glasgow
 
Published:
CadLine, the CAD solution developer and supplier, delivering innovative and market-focused Archi

2012 GRAITEC R&D Awards

2012 GRAITEC R&D Awards
 
Published:
This year, GRAITEC presented the 2011 R&D AWARDS to 5 members of the R&D department in Romania. The awards were handed by Francis GUILLEMARD, CEO and founder of the GRAITEC Group, at the 2012 Kick Off, in Bucharest.

ARCHLineA La Carte the brand new Interior Design Service

ARCHLineA La Carte the brand new Interior Design Service
 
Published:
Today we are excited to announce the launch of ARCHLine A La Carte the brand new Interior Design Service.

ARCHLine.XP 2012 version released

ARCHLine.XP 2012 version released
 
Published:
CadLine Network Ltd. is proud to announce that the latest version of its cutting edge design CAD software "ARCHLine.XP"

Delcam to show easier inspection software at Control

Delcam to show easier inspection software at Control
 
Published:
Delcam will demonstrate the 2012 release of its PowerINSPECT inspection software at the Control exhibition to be held in Stuttgart from 8th to 11th May.

Delcam to show latest CADCAM to tyre manufacturers at Tire Technology

Delcam to show latest CADCAM to tyre manufacturers at Tire Technology
 
Published:
Delcam will show how its CADCAM software can help manufacturers to design and machine tyre moulds more efficiently and faster than ever before at the Tire Technology Expo in Cologne, Germany, from 14th to 16th February.

ARCHLine.XP Interior 2012 - Presentation in Bratislava

ARCHLine.XP Interior 2012 - Presentation in Bratislava
 
Published:
You are kindly invited toparticipate in the following event where we launch our new product software ARCHLine.XP Interior 2012 developed specially for Interior Designers.

Geometric to launch CAMWorksXpress at EuroMold 2011

Geometric to launch CAMWorksXpress at EuroMold 2011
 
Published:
Geometric Limited, a leader in Product Lifecycle Management (PLM), Global Engineering Services and Offshore Product Development (OPD) solutions and technologies, announces the launch of a new CAM package at a surprisingly affordable price, to address the needs of the home machinist and the new users...

Delcam adds more clip-art to $149 engraving and woodworking software

Delcam adds more clip-art to $149 engraving and woodworking software
 
Published:
Delcam has added 130 extra reliefs to the range of standard clip-art supplied with its ArtCAM Express software for engraving and woodworking, including architectural, floral, frame and texture examples.

Delcam offers 3D woodworking software for $149.00 at AWFS

Delcam offers 3D woodworking software for $149.00 at AWFS
 
Published:
Delcam's recently launched CADCAM software starting at $149.

Altair to Showcase New Method of Optimizing Weight of Composite Fan Blades at ASME Turbo Expo 2011

Altair to Showcase New Method of Optimizing Weight of Composite Fan Blades at ASME Turbo Expo 2011
 
Published:
Altair Engineering, Inc., today announced that it will deliver a paper presentation at ASME Turbo Expo 2011, describing a new application for optimizing the weight of composite fan blades using Altair's HyperWorks suite of computer-aided design tools.

Bluebeam® Software Wins AIA Expo Best in Show Booth Award

Bluebeam® Software Wins AIA Expo Best in Show Booth Award
 
Published:
Digital PDF Solution Recognized for Creative Design and Helpful Demonstration of its Paperless Workflow Capabilities

Delcam offers 3D woodworking software for 125 Euros at Ligna

Delcam offers 3D woodworking software for 125 Euros at Ligna
 
Published:
Delcam will show the 125-Euro version of its ArtCAM CADCAM software for woodworking at the Ligna exhibition to be held in Hannover from 30th May to 3rd June.

Rendering Europe: Chaos Group visits UK, Poland & Sweden to introduce V-Ray 2.0!

Rendering Europe: Chaos Group visits UK, Poland & Sweden to introduce V-Ray 2.0!
 
Published:
Excitement over the release of V-Ray 2.0 for Maya and V-Ray for 3ds Max continues as Chaos Group gears up to visit three European countries this month: United Kingdom, Poland, and Sweden. The team will deliver exclusive presentations on the new and enhanced features of V-Ray 2.0. Chaos Group welcome...

KBB London 2011 - Top kitchen bedroom bathroom show in London

KBB London 2011 - Top kitchen bedroom bathroom show in London
 
Published:
CadLine, the CAD solution developer and supplier, delivering innovative and market-focused Architectural and Interior Design software , will be exhibiting at this year's KBB London - Top kitchen bedroom bathroom show in London, UK.

Delcam offers new modules for $149 CADCAM software

Delcam offers new modules for $149 CADCAM software
 
Published:
Delcam has introduced ten new modules for ArtCAM Express, the company's $149 software for engraving, signmaking and woodworking.

Delcam offers 3D signmaking software for $149 at ISA

Delcam offers 3D signmaking software for $149 at ISA
 
Published:
Delcam will launch the $149 version of its ArtCAM CADCAM software for 3D signmaking at the ISA International Sign Expo to be held in Las Vegas from 28th to 30th April.

Modern Steel Construction - Enhanced PDF Tool Introduced

Modern Steel Construction - Enhanced PDF Tool Introduced
 
Published:
Drawings are a big part of any structural steel project, whether viewed on paper prints or an electronic device. Bluebeam Software, which specializes in PDF platform technologies that provide a smart, simple solution to creating, marking up, editing and managing PDF files, introduced its newest tool...

ARCHline.XP 2011 Available

ARCHline.XP 2011 Available
 
Published:
CadLine is proud to announce that the latest version of its cutting edge design CAD software "ARCHLine.XP" is released.

AMD Fusion APUs and AMD Radeon Graphics Cards Accelerate Internet Explorer 9

Published:
Today at SXSW Interactive, AMD (NYSE: AMD) announced that the new Internet Explorer 9 from Microsoft is accelerated by the AMD Fusion Family of Accelerated Processing Units (APUs) and AMD Radeon™ graphics cards, helping to deliver the next-generation Web to consumers.

Delcam to host MTA/UKTI export seminars on China and Russia

Delcam to host MTA/UKTI export seminars on China and Russia
 
Published:
Delcam is to host two overseas market briefings in a series of events to promote exports being organised by MTA in partnership with UKTI under the heading "Go, Export and Survive.

Meet ZW3D & ZWCAD at EXPOMANUFACTURA 2011 in Mexico

Meet ZW3D & ZWCAD at EXPOMANUFACTURA 2011 in Mexico
 
Published:

SOLIDTEC (Solidtec Servicios Computacionales S.A de C.V.), a ZW3D Value-added reseller in Mexico, will present ZW3D and ZWCAD at EXPO MANUFACTURA 2011 from March 1st to 3rd.

Toyota Industrial Equipment S.A. Selects MSC.Software Solutions to Optimize Product Design

Toyota Industrial Equipment S.A. Selects MSC.Software Solutions to Optimize Product Design
 
Published:

MSC.Software Corporation, a leader in multidiscipline simulation solutions that accelerate product innovation, today announced that Toyota Industrial Equipment S.A. has chosen SimXpert with MD Nastran for the modeling and analysis of chassis components and forklift truck body frames for custom...

Penn State University Earns Autodesk BIM Experience Award

Published:

Autodesk, Inc. (NASDAQ:ADSK), a leader in 3D design, engineering and entertainment software, announced that The Pennsylvania State University (Penn State) has been awarded an Autodesk BIM Experience Award. The university’s Stuckeman School of Architecture and Landscape Architecture and t...

Delcam to partner with additive manufacturing company Marcam Engineering

Delcam to partner with additive manufacturing company Marcam Engineering
 
Published:

Delcam, the world’s leading specialist supplier of CAM software, has signed a non-legally binding memorandum of understanding with the leading German developer of software for additive manufacturing, Marcam Engineering GmbH.  On completion of the legal contracts, Delcam will acquire...

Delcam offers free ArtCAM demo software for artistic users

Delcam offers free ArtCAM demo software for artistic users
 
Published:

Free demonstration versions of the 2010 versions of Delcam’s ArtCAM Express and ArtCAM Insignia artistic CADCAM software are now available.

Autodesk Seek Adds Analytics and Branding Services

Published:

Greenbuild International Conference and Expo — Autodesk, Inc. (NASDAQ:ADSK) is expanding the Autodesk Seek web service to make it easier for building product manufacturers to provide product information directly to designers and analyze how their products are being used.

Autodesk Demonstrates Conceptual Design With Energy Analysis at Greenbuild Expo

Published:

Autodesk demonstrated its latest conceptual energy analysis (CEA) tools at the Greenbuild Expo in Chicago. These tools are designed to help address the critical need for sustainability to be a factor during the early phase of a building’s design.

ArchiCAD-designed Russian Pavilion at World Expo 2010 in Shanghai Takes the Silver

ArchiCAD-designed Russian Pavilion at World Expo 2010 in Shanghai Takes the Silver
 
Published:

GRAPHISOFT announced today that the Russian Pavilion of the Shanghai World Expo 2010 has won second prize in the Theme Development category. The pavilion was designed using ArchiCAD by the architects of TOTEMENT/PAPER, lead by Levon Airapetov.

Latest Enhancements to Teamcenter Express Boost Collaboration and Productivity for Manufacturers

Latest Enhancements to Teamcenter Express Boost Collaboration and Productivity for Manufacturers
 
Published:

Siemens PLM Software, a business unit of the Siemens Industry Automation Division and a leading global provider of product lifecycle management (PLM) software and services, today announced Version 5.3 of Teamcenter® Express software with key usability and desktop integration enhancements t...

Creaform continues to capture the global market of 3D metrology

Creaform continues to capture the global market of 3D metrology
 
Published:

Creaform expands its presence overseas with three new offices in Germany, India and China.

Antonio Citterio Patricia Viel and Partners Earns Autodesk BIM Experience Award

Antonio Citterio Patricia Viel and Partners Earns Autodesk BIM Experience Award
 
Published:

Autodesk, Inc. (NASDAQ:ADSK), a leader in 3D design, engineering and entertainment software, announced that Antonio Citterio Patricia Viel and Partners (ACPV), an acclaimed multidisciplinary architecture and interior design practice based in Milan, Italy, has received an Autodesk BIM...

New Support Brings Efficiency and Productivity to Vectorworks 2011 AEC CAD Designers

Published:

New Support Brings Efficiency and Productivity to Vectorworks 2011 AEC CAD Designers

Konica Minolta Sensing Announces FD-Series Spectrodensitometers And COLIBRI® To Digital Imaging Market At Graph Expo 2010

Published:

Konica Minolta Sensing Americas, Inc. (KMSA), the worldwide leader in the industrial measurement of color, light and shape, announces its new FD-Series Spectrodensitometers and COLIBRI® color matching software to the digital imaging market at Graph Expo 2010 October 3-6, 2010 in Chicago&rs...

SolidCAM Launches SolidCAM Xpress

SolidCAM Launches SolidCAM Xpress
 
Published:

A new opportunity for all companies to experience integrated CAM directly inside SolidWorks

MSC.Software Releases SimXpert 2010

MSC.Software Releases SimXpert 2010
 
Published:

MSC.Software, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced that SimXpert 2010 is released and ready for download.